Apeks 2000PSI THE DUPLEX - Page 4

Apeks Supercritical The Duplex™ Operation Manual
4
Revision Date 8/28/2018
5.2.13. Extractor Not Equalizing Alarm
5.2.14. Extractor Water Flow Lost Alarm
5.2.15. Extractor Ambient Temperature Alarm
5.2.16. Extractor (Vessel A/B, Top/Bottom) PSI High Alarm.
5.2.17. Extractor (A/B) Vessel Temperature Alarm
5.2.18. Filter (1B/2B) PSI Drop Fault/Warning
5.2.19. Low System CO
2
Pressure
5.2.20. Oil Pressure Lost Alarm
5.2.21. Pressure Test Fail Alarm
5.2.22. Pump PSI High During Recovery Alarm
5.2.23. Pump Motor Auxiliary Fault Alarm
5.2.24. Pump Motor Overload Alarm
5.2.25. Separator Pressure Creep Alarm
5.2.26. Separator Water Flow Lost Alarm
5.2.27. Separator (1B/2B) Vessel PSI High Alarm
5.2.28. Separator (1B/2B) Vessel Temperature Alarm
5.2.29. Separator Ambient Temperature Alarm
5.2.30. Service Separator Mode Extractor PSI High Alarm
5.2.31. Valve Fault Alarm
5.3. Other Symptoms
5.3.1. Vessel not Pressurizing
5.3.2. High Extractor Pressure and Low Separator Pressure
5.3.3. High Separator Pressure and Low Extractor Pressure
6. References
Appendix A – Belt Tension Testing/Adjustment
Appendix B – Diaphragm Pump Priming
Appendix C – Check Valve Cleaning
Appendix D – Electrical Screw Torque Requirement
Appendix E – Piping and Instrumentation Diagram
Appendix F – CO
2
Phase Diagram
31
31
31
31
31
31
31
31
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
33
34
35
36
39
40
43