Diagram – 9 Main menu and submenu of parameter settings
P1.1 Select pH standard solution
P1.2 Select resolution
P1.3 Set stability criteria
P1.4 Restore to factory setting
P2.1 Select electrode constant
P2.2 Select reference temp
P2.3 Adjust temperature
compensation factor
P2.4 Adjust TDS factor
P2.5 Restore to factory setup
P3.1 Select temperature unit
P3.2 Automatic power-off setup
P3.2 Automatic lock-up setup
Submenu of pH parameter setting
Submenu of Cond. parameter setting
Submenu of basic parameter setting
Main menu of parameter setting
To Next Page
Loading...
Need help?
General
