1 Brief Introduction
Thanks for purchasing SX823-B pH/Conductivity meter.
This meter is a perfect combination of the most advanced electronics technology, sensor technology,
and software design, and is the most cost-effective portable electrochemical meter designed for
industrial and mining enterprises, power plants, water treatment engineering, environmental protection
industry, etc., especially ideal for general field use.
In order to use and maintain the instrument properly, please read the manual thoroughly before use.
(To improve instrument performance constantly, we reserve the right to change the manual and
accessories without giving notice in advance.)
1.1 Basic Features
● The microprocessor-based portable meter features automatic
calibration, automatic temperature compensation, function setup,
self-diagnostics, automatic power-off and low voltage display.
PC10 meter is able to measure up to 3 parameters simultaneously
and switch displays effortlessly. Please see Diagram -1:
two electrodes at most can be fit into the clip to measure 3 parameters
simultaneously.
● The meter’s digital filter improves measurement speed and accuracy. There is a stable reading
indication on the display.
● The package includes a portable case, a meter, electrodes, standard solutions and all accessories,
which is convenient to use in field.
● The meter is dust proof and waterproof, meeting the IP57 rating.
1.2 pH Measurement Features
● 1-3 points automatic calibration, the meter provides calibration guide and automatic checking
function.
● The meter is able to recognize pH standard buffer solutions automatically. USA series and NIST
series buffer solutions can be selected.
● The meter provides three types of reading stability criteria.
1.3 Conductivity Measurement Features
● 1-4 points automatic calibration, the meter provides calibration guide and automatic checking
function.
● The meter is able to switch between conductivity and TDS.
● The meter is able to recognize conductivity standard solutions automatically.