Apogee duet3 User Manual

Apogee Duet 3 User’s Guide
Duet Top Panel Features
With Duet’s top panel Control knob, you have the most important settings right at your fingertips. Set
Input gain plus Speaker and headphone listening level.
Tap the top panel Control knob to toggle the knob focus (i.e. the parameter being controlled by the
knob) through this sequence:
1. IN 1 - set Analog In 1 Gain
2. IN 2 - set Analog In 2 Gain
3. SP - set the stereo Speaker Out level
4. HP - set the stereo Headphone Out level
The selected input or output signal level is displayed on the top
panel peak meters.
To mute and unmute the Speaker and Headphone outputs,
toggle the knob focus to an output, then press and hold the
Control knob. When the output is muted, the corresponding
LED flashes.
When 48 volt phantom power is engaged on Analog In 1 or 2,
the corresponding LED’s brightness pulses slowly.
When the on-board ECS plugin is engaged on Analog In 1 or
Analog In 2, the FX1 or FX2 LED illuminates.
15

Apogee duet3 Specifications

General

Type	Audio Interface
A/D Resolution	24-bit/192kHz
Number of Preamps	2
Phantom Power	Yes
USB	USB-C
Output Connectors	TRS
Compatibility	macOS
Software	Apogee Control
Inputs	2 x XLR/TRS combo, 2 x TRS
Power	Bus-powered
Input Connectors	XLR, TRS