Page 27
Apollo GEM Installation Guide
WARNING: ISOLATE MAINS SUPPLY BEFORE COMMENCING INSTALLATION
INSTALLATION AND CONNECTION SHOULD ONLY BE CARRIED OUT BY A SUITABLY QUALIFIED
PERSON AND IN ACCORDANCE WITH THE CURRENT EDITION OF THE IEE WIRING REGULATIONS.
A means of disconnection from the supply having at least 3mm contact separation in both poles
must be incorporated in the fixed wiring.
If in doubt consult a qualified electrician.
Electric Water (Immersion) Element
The Apollo GEM system uses a standard electric water element up to 3KW and will electronically
regulate the power flowing into the heating element to give a controlled power input from 50W to
3000W.
Apollo GEM
Installation Guide
To Next Page
Loading...