MANAGEMENT
SYSTEMS
Assessed to ISO 9001:2008
Cert/LPCB ref. 010
Assessed to ISO 14001:2004
Cert/LPCB ref. 010 EMS
MANAGEMENT
SYSTEMS
Cert/LPCB ref. 010
PRODUCT
CERTIFICATION
Apollo Test Set - User Manual
2
Contents
Safety first 3 How do I use Programmer mode? 25
Technical information 3 Using the Programmer mode test buttons 26
Where do I find things? 3 Self test 26
How do I switch the Test Set on? 4 Fast test 26
What do I see when the Test Set is switched on? 4 LED test 27
How do I switch the Test Set o? 4 Sensor status 27
How do I control the touchscreen? 5 Settings 28
What are Device Range and Device Test Set IDs? 5 Mode 28
How do I navigate through the various menu screens? 7 Polling LED 28
How do I use the Settings? 7 Rapid update 28
Screen settings 7 Soft address 28
Locations 8 Return to factory defaults 29
Cable types 9 Sounders 30
Setting the date and time 11 Operate relays 30
Setting the language 11 How do I use Loop diagnostics? 31
About 11 Short circuit fault 32
How do I use the Loop View menu? 12 Earth fault 32
Selecting a polling range 13 Cable impedance and cable run 33
Viewing the details of a single address 14 Loop supply from direction - OUT 33
Changing the output bit status 15 Loop supply from direction - IN 34
Self test 16 Occupied address search 35
Fast Test 16 Loop devices map building 36
Isolator control 18 Earth fault location search 36
Configuration status 18 How do I enter a location? 37
Mode and polling LED 19 How do I use Stored Events, Data Logs 38
Analogue Value/Drift 20 How do I update firmware? 40
Control and status 21 Troubleshooting 42
Events 22 How do I do a hard reset? 42
Event logs 23 How do I change the Test Set battery? 42
Data log 24 Appendix A - Menu tree 43
Appendix B - Short circuit and earth fault detection 44
Appendix C - Loop supply from direction - OUT 45
Appendix D - Loop supply from direction - IN 46
Appendix E - Earth fault location search 47
Appendix F - Firmware update 48
Appendix G - Line Voltages 49
Apollo Fire Detectors Ltd
36 Brookside Road
Havant
Hampshire, UK
PO9 1JR
© Apollo Fire Detectors Ltd 2018
To Next Page
Loading...