MANAGEMENT
SYSTEMS
Assessed to ISO 9001:2008
Cert/LPCB ref. 010
Assessed to ISO 14001:2004
Cert/LPCB ref. 010 EMS
MANAGEMENT
SYSTEMS
Cert/LPCB ref. 010
PRODUCT
CERTIFICATION
Apollo Test Set - User Manual
3
Safety first
• Read this User Manual completely before using the Apollo Test Set.
• The Apollo Test Set is electronic test equipment and care should be taken when handling and storing. Dropping the
unit onto a hard surface could damage it.
• The Apollo Test Set is designed for indoor use only and should not be subjected to harsh environments. It is not
designed for use in hazardous areas - those containing explosives or dust. Do not use the Test Set in places where
temperatures and/or humidity are high or go through rapid changes.
• Do not use the Apollo Test Set if it is not operating correctly - consult the troubleshooting section or seek technical
advice.
• If the Apollo Test Set is used in a manner not specified by the Manufacturer, the protection provided by the equipment
may be impaired and the warranty invalidated.
Technical information
Power source Lithium-ion battery pack or 12 V Power Supply Unit
Battery charging time Approx 3 hours
Operating temperature 0 ºC to 40 ºC
Humidity - no condensation or icing 10 to 95 % RH
Dimensions 215 mm x 165 mm x 50 mm
Weight 935 g
Where do I find things?
Loop Out + (Red)
Loop Out - (Black)
Loop Out - Screen (Yellow)
(Green)
Loop In + (Red)
Loop In - (Black)
Loop In - Screen (Yellow)
Power On
Power LED
Charging port
USB Port
(on the side of the unit)
Strap fixings
Battery
Cover
Stand
To Next Page
Loading...