Checkout Procedures
Apollo SL40 Field Maintenance Manual
25
S
ECTION
3 - C
HECKOUT
P
ROCEDURES
GENERAL
This Section provides procedures for final verification and checkout of the SL40 prior to
returning the unit to service. During the checkout, the Test Data Sheet described in
Appendix A is to be filled out. If all items check out properly, the unit may be reinstalled
in the aircraft and returned to service.
SERVICE VERIFICATION
Verify that unit has been repaired properly, all components have been reinstalled and
properly secured, and that all functions are set as required. Note the date the repairs were
completed, components replaced, technician who performed the repair and any other
pertinent details on the Test Data Sheet.
FUNCTIONAL CHECKOUT
After replacement of the faulty component and before reinstalling the SL40 in the aircraft,
retest the unit to ensure that all functions are operating properly.
DISPLAY CHECK
Perform the display test given on Page 9. Record the test results on the Test Data Log
sheet in Appendix A.
CONTROLS TEST
Perform the controls test given on Page 10. Record the test results on the Test Data Log
sheet in Appendix A.
TRANSMITTER TESTS
Perform the transmitter tests beginning on Page 13. Record the test results on the Test
Data Log sheet in Appendix A.
RECEIVER TESTS
Perform the receiver tests beginning on Page 17. Record the test results on the Test Data
Log sheet in Appendix A.
To Next Page
Loading...
Need help?
General
