What to do if Applied Biosystems Laboratory Equipment shows 'T temperature out of range m' error?
If your Applied Biosystems Laboratory Equipment displays a 'T temperature out of range m' error, check the input value and try again.
What to do if Applied Biosystems Laboratory Equipment shows 'User name already defined'?
If your Applied Biosystems Laboratory Equipment displays a 'User name already defined' message, ensure that you are not duplicating user names.
What does 'Remove infinity hold first' mean on Applied Biosystems GeneAmp PCR System 2700 Laboratory Equipment?
The 'Remove infinity hold first' message on your Applied Biosystems Laboratory Equipment indicates that you need to add segments prior to the post-PCR infinity hold.
What to do if the whirring fan does not sound on Applied Biosystems Laboratory Equipment?
If the whirring fan sound is absent on your Applied Biosystems Laboratory Equipment, verify that the power switch is ON, the power cord is connected, and check the fuses.
General| Temperature Range | 4°C to 99°C |
|---|---|
| Temperature Uniformity | ±0.5°C |
| Block Capacity | 96 x 0.2 mL tubes |
| Display | LCD |
| Interface | RS-232 |
| Temperature Accuracy | ±0.25°C (35-99.9°C) |
| Thermal Cycler Type | Peltier-based |
Defines alert words (IMPORTANT, CAUTION, WARNING, DANGER) and their symbols.
Covers safety for moving, lifting, and operating the instrument.
Provides warnings and guidelines for handling chemicals safely.
Details safety guidelines for handling and disposing of chemical waste.
Covers safety precautions related to grounding, fuses, power, and overvoltage.
Warns about hazards from moving parts and hot surfaces.
Describes the instrument, its features, and specifications.
Explains the control panel's components: screen, keys, and navigation.
Provides step-by-step instructions to turn on the instrument.
Explains how to add a user name for method separation and storage.
Instructs on how to modify an existing method's parameters.
Details procedures to start and stop a PCR run.
Provides procedures for loading samples with different tube configurations.
Step-by-step guide to initiating a PCR run on the instrument.
Explains how to pause a run and how to stop it completely.
Covers adding, modifying, or removing user accounts on the system.
Details the graphical representation of methods on the Create/Edit screen.
Explains how to modify methods using advanced features like holds and cycles.
Explains how to set instrument parameters like time, date, and printer settings.
Covers performing display and keypad diagnostic tests.
Details running Rate and Cycle tests to check heating/cooling systems.
Provides instructions for cleaning the sample wells and heated cover.
Step-by-step guide on how to safely replace instrument fuses.
Lists error messages, their descriptions, and recommended actions.
Lists error messages indicating potential hardware malfunctions and their solutions.
Provides a table of common problems, causes, and remedies.
To Next Page