Need help?Do you have a question about the Applied Biosystems StepOnePlus and is the answer not in the manual?
General| Type | Real-Time PCR System |
|---|---|
| Detection Method | Fluorescence |
| Excitation Source | LED |
| Thermal Uniformity | ±0.5 °C |
| Number of Channels | 4 |
| Thermal Cycler Type | Peltier-based |
| Connectivity | USB, Ethernet |
| Sample Capacity | 96-well plate |
| Temperature Range | 4°C to 100°C |
| Thermal Accuracy | ±0.25°C |
| Ramp Rate (heating) | 3.5°C/sec |
| Ramp Rate (cooling) | 2.5°C/sec |
| Power Requirements | 100 to 240 VAC |
| Display | Touchscreen |
Details on reviewing the guide and preparing for the system installation.
Recommendations for protective devices and software for system protection.
Guidance on choosing between colocated and standalone installation layouts.
Outlines the recommended workflow for system installation.
Steps and requirements for unpacking and placing the instrument.
Lists components to confirm receipt for the instrument and kits.
Instructions for initial system testing and defining instrument settings.
Guidance on finishing installation based on chosen layout after setup.
Details on when and how to perform a colocated installation.
Steps for installing and setting up the computer for colocated use.
To Next Page