To Next PageTo Next Page
Need help?Do you have a question about the Applied Biosystems QuantStudio 5 and is the answer not in the manual?
General| Instrument Type | Real-Time PCR System |
|---|---|
| Number of Channels | 5 |
| Temperature Range | 4°C to 100°C |
| Detection Method | Fluorescence |
| Connectivity | USB, Ethernet |
| Software | QuantStudio Design and Analysis Software |
| Block change | Yes |
| Throughput (96-well) | Up to 96 samples |
| Throughput (384-well) | Up to 384 samples |
| Reaction volume (96-well) | 10-100 µL |
| Thermal range | 4°C to 100°C |
| Multiplexing | Yes |
| Excitation Sources | LED |
| Detection Channels | 5 |
| Data Acquisition | Continuous |
| Sample Capacity | 96-well and 384-well |
| Supported chemistries | TaqMan, SYBR Green |
| Reaction volume (384-well) | 5-20 µL |
| Thermal Cycler Block Capacity | 96-well or 384-well |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Emission Filters | Multiple options available |
Details the time required for instrument unpacking, installation, and verification.
Provides detailed dimensions and weight specifications for instrument and computer components.
Specifies required clearance around the instrument for installation and maintenance.
Details the supported configurations for connecting the instrument to a computer.
Outlines the acceptable environmental conditions for instrument operation and storage.
Specifies electrical specifications, including power requirements and receptacle types.
Recommends protective devices like power line regulators and surge protectors.
Details LAN connectivity options, requirements, and firewall port settings.
Ensures personnel follow safety practices and policies to protect lab personnel.
Lists essential safety equipment and protection measures needed at the installation site.
Specifies minimum computer hardware and OS requirements for the desktop software.
