Receive and inspect the shipment
1.
V
erify that the items on the shipping list are the same items that you ordered at
the time of purchase.
2.
Carefully inspect the shipping containers. Report any damage to customer
support. Record any damage or mishandling on the shipping documents.
3.
Unpack and store the reagents and plates as specied.
Move the instrument packages to the installation site
1.
Clear the installation site of all unnecessary materials.
2.
Mov
e the instrument packages and other shipping containers to the installation
site.
CAUTION! Do not tip the packaged instrument on end. Tipping may
damage the instrument hardw
are and electronics.
3.
Follow the pre-printed instructions on the instrument packaging to install the
instrument.
CAUTION! PHYSICAL INJUR
Y HAZARD. Do not aempt to lift or move the
instrument without the assistance of others, the use of appropriate moving
equipment, and proper lifting techniques.
Improper lifting can cause painful and permanent back injury. Depending on
the weight, moving or lifting an instrument may require two or more people.
Note: After installation, keep the instrument packaging in case y
ou need to relocate
the instrument.
Receive and inspect the shipment
QuantStudio
™
3 and 5 Real-Time PCR Systems Site Preparation Guide | MAN0010405 C.0
13
To Next Page
Loading...
Need help?
General
