Applied Precision WS 2120 User Manual

Working Standard
User’s Guide
WS-UGFW619-EN www.appliedp.com
86
Measurement Commands
Measurement commands return measured values in form of a set of three real numbers without unit.
Values are in classic or exponential format (depends on value and firmware version) with max. 6
decimal places and separation of decimal part of number is made by point.
Three values are separated by comma or comma followed by space (depends on firmware version).
Examples of return string:
220.123456,221.234567,219.345678
+3.456789E-03, +4.567891E-03, +5.678912E-03
VOLT:AC:RANG?
Request for the voltage range in connected voltage accessory (Voltage Transducer).
Answer can be 0, 1 … (up to supported number of ranges).
VOLT:AC:RANG {<range>}
Setting the voltage range in connected voltage accessory (Voltage Transducer).
Parameter can be 0, 1 … (up to supported number of ranges).
VOLT:AC:RANG:AUTO?
Request for the status of auto voltage range in connected voltage accessory (Voltage Transducer).
Answer is: 0 = OFF, 1 = ON.
VOLT:AC:RANG:AUTO {<auto_range>}
Setting the auto voltage range in connected voltage accessory (Voltage Transducer).
Parameter is: 0 = OFF, 1 = ON.
CURR:AC:RANG?
Request for the current range in connected current accessory.
Answer can be 0, 1 … (up to supported number of ranges).
CURR:AC:RANG {<range>}
Setting the current range in connected current accessory.
Parameter can be 0, 1 … (up to supported number of ranges).
CURR:AC:RANG:AUTO?
Request for the status of auto current range in connected current accessory.
Answer is: 0 = OFF, 1 = ON.
CURR:AC:RANG:AUTO {<auto_range>}
Setting the auto current range in connected current accessory.
Parameter is: 0 = OFF, 1 = ON.
CHNLA:AC:RANG?
Request for the measurement range in accessory connected to input A.
Answer can be 0, 1 … (up to supported number of ranges).
CHNLA:AC:RANG {<range>}
Setting the measurement range in accessory connected to input A.
Parameter can be 0, 1 … (up to supported number of ranges).
CHNLA:AC:RANG:AUTO?
Request for the status of auto range in accessory connected to input A.
Answer is: 0 = OFF, 1 = ON.
CHNLA:AC:RANG:AUTO {<auto_range>}

Applied Precision WS 2120 Specifications

General

Brand	Applied Precision
Model	WS 2120
Category	Measuring Instruments
Language	English