
Do you have a question about the Aptiv DEA7 Series and is the answer not in the manual?
| Brand | Aptiv |
|---|---|
| Model | DEA7 Series |
| Category | Car Receiver |
| Language | English |
Press to turn radio ON, toggle sources, and press/hold to turn radio OFF.
Rotate to adjust volume, press for mute, press/hold for menus.
Press to select previous/next track or station; hold for fast seek/reverse.
Controls for scanning, play/pause, random/repeat, tuning, and source selection.
Adjust frequency steps for FM, AM, WX; radio finds tunable stations.
Short press preset buttons (1-6) to store/tune stations.
Scan seeks strong stations; Autoscan stores top six stations temporarily.
View channel info; select channels via numerical order or presets.
Store SXM channels to presets; view radio ID for service activation.
Understand SXM status messages and check antenna connection.
Troubleshoot 'No Signal', 'Unsubscribed', or 'Unavailable' conditions.
Manage DAB announcements and traffic alerts.
Configure DAB announcements, alternate frequencies, and regional settings.
Handle emergency alerts and view available DAB stations.
Understand DAB messages and check iPod model compatibility.
Connect iPod via USB; radio plays music and displays track information.
Access iPod Menu to navigate playlists, artists, albums, genres, etc.
Select songs from playlists, artists, albums, genres, podcasts, or songs lists.
Navigate composers and audio books; select content for playback.
Use PREV, NEXT, FF/FR, RDM, and RPT for music playback.
Understand 'Unsupported' and 'No Music' messages for troubleshooting.
Guidelines for MP3 and WMA files for compatibility.
Play music from USB devices or front/rear auxiliary inputs.
Enable, disable, and connect Bluetooth devices to the radio.
Steps to pair a new Bluetooth device with the radio.
Connect previously paired Bluetooth devices.
Support for simultaneous connection of two Bluetooth devices.
Disconnect or remove paired Bluetooth devices from the radio.
Activate voice recognition and utilize hands-free calling features.
Access dial menu, contacts, last calls, and favorites for calling.
View and dial contacts or review last called numbers.
Accept, reject, end, mute microphone, or transfer calls.
Use connected Bluetooth device as an audio source for music playback.
Navigate menus for audio, clock, alarm, and other system adjustments.
Adjust auto EQ, bass, middle, treble, fade, and balance settings.
Configure speaker output between 2 or 4 channels.
Adjust volume based on speed and configure clock display and time.
Set alarm ON/OFF, choose tone/music, adjust volume, and configure snooze.
Adjust display brightness and color hue.
Refresh DAB lists and configure DAB radio settings.
Configure regional programming, traffic announcements, and categories.
View available DAB channels for visibility.
Adjust seek sensitivity and set tuning mode to Auto or Manual.
Enable/disable category search and automatic track playback in SXM.
Access USB music menu and understand root directory/empty folder behavior.
Information on fuses and clock backup functionality.
Troubleshoot issues with tuning stations or iPod recognition/sound.
Troubleshoot iPod operation range, temperature, and cable compatibility.
Resolve issues with radio not recognizing or communicating with BT devices.
Troubleshoot problems with hearing music from Bluetooth devices.
Understand 'no-link' status for Rear Seat Audio during system wake-up.
Information on SiriusXM, DAB, and Bluetooth brand designations.
Details on FCC compliance and industry Canada standards.
Guidelines for product cleaning and warnings about driving distraction.
Statements on device compliance and potential interference.