Aqua HC151+ MULTI - Constant Mode Setup

HC151+ MULTI / HC200+ MULTI
ENGLISH
3.5.1 CONSTANT mode
This mode allows the pump to dose at a constant frequency that can be set by the user; this function
allows the pump to work without the need to connect it to an external signal. You can decide to set the
frequency in strokes / minute or in strokes / hour.
Here are the steps to set up this feature:
In strokes / min mode
The maximum adjustable value is
determined by the choice of performance
A-B-C
(e.g. B = 120 imp./min)