ARCA DYNAMIC - 3. Adjustments

13/28
MUD00000
GB
3. Adjustments
Summary
3.1. Setting the label on the product ...............................................................14
3.2. Micro-switch adjustment ...........................................................................14
3.3. Photocell adjustment .................................................................................15
3.4. Adjustment of the transport roller pressure ............................................16
3.5. Adjustment of the mechanical sensor for end of roll ............................16
3.6 Label roller replacement .............................................................................17
3.7. Paper path ...................................................................................................18
3.7.1 Paper path with xed or articulated peeler --------------------------------------------------------------- 18
3.7.2 Paper path with “Concorde” peeler ------------------------------------------------------------------------- 19
3.7.3 Paper path with Hot print unit -------------------------------------------------------------------------------- 19
3.8 Take up roller ...............................................................................................20