4.1.2. Cleaning of the knurled and rubber rollers
In order to clean the labels transport the knurled and rubber rollers:
• check that the electrical voltage is disconnected and that the pneumatic valve is closed;
• unhook the pulling roller(1)using the blocking lever(2);
• clean the rollers and remove residual labels;
• reset the pulling roller using the blocking lever.(2).
4.2. Extraordinary maintenance
Any extraordinary maintenance intervention must be performed by authorised personnel only.
It is possible to get informations on the authorised personnel calling ARCA ETICHETTE S.p.A.
ATTENTION! Any guarantee decays whenever interventions on the
machine are performed by non authorised personnel.
ATTENTION! ARCA ETICHETTE S.p.A. declines any responsibility
for demages to person or things deriving from the use of spare parts
different from those indicated in the spare parts list of the labelling
machine.
To Next Page
Loading...