18 Dishwasher / User’s Manual/48 EN
Preparation
C
The rinse aid used in
dishwashers is a special
combination used to
increase drying efficiency
and prevent water or
limescale stains on the
washed items. For this
reason, care must be paid
to have rinse aid in the rinse
aid reservoir and to use rinse
aids produced specially for
dishwashers only.
1. Open the lid of the rinse aid
reservoir by pressing its latch (B).
2. Fill the reservoir until “MAX” level.
3. Turn the rinse aid amount
adjuster manually to a position
between 1 and 6 (4). If there are
stains on tableware items after
washing, level must be increased
and if there is a blue trace after
wiping them by hand, it must be
decreased. This is set to position 4
as factory default.
4. Close the lid of the reservoir by
pressing on it lightly.
C
Wipe clean any spilled
rinse aid outside the
reservoir. Rinse aid that
spilled accidentally will
cause foaming and it will
eventually decrease washing
performance.
Never wash dishes soiled by
cigarette ash, candle remnants,
polish, dyestuff, chemicals, etc. in
your dishwasher.
Do not wash iron alloy items in the
dishwasher. It can get corroded or
leave stains on other items.
Do not wash cutlery with wooden
or bone stems, glued pieces,
or pieces that are not resistant
to heat, as well as copper and
tin-plated containers in the
dishwasher.
To Next Page
Loading...
