Archos 50 Cesium - Powering On and First Use

8
Turning on
1. Plug the charging cable in the Micro-USB port and connect it to its charger.
Before using your device for the rst time, charge its battery completely.
2. Press and hold the ON/OFF button to turn on the device.
The rst time you start up your ARCHOS, the installation wizard will help you
set up your device.
3. Follow the instructions.
If you have inserted a SIM card, you may need to enter a PIN code.
Beware of typing a wrong PIN code.
Getting started
ARCHOS 50 Cesium book.indd 8 12/11/2015 11:19:04