Macro Function Number List (continued)
FN Description
569 Reserved for future use
570 Readback A/D Channel 1 Stored Low
571 Readback A/D Channel 2 Stored Low
572 Readback A/D Channel 3 Stored Low
573 Readback A/D Channel 4 Stored Low
574 Readback A/D Channel 5 Stored Low
575 Readback A/D Channel 6 Stored Low
576 Readback A/D Channel 7 Stored Low
577 Readback A/D Channel 8 Stored Low
578 Readback A/D Channel 1 Stored High
579 Readback A/D Channel 2 Stored High
580 Readback A/D Channel 3 Stored High
581 Readback A/D Channel 4 Stored High
582 Readback A/D Channel 5Stored High
583 Readback A/D Channel 6 Stored High
584 Readback A/D Channel 7 Stored High
585 Readback A/D Channel 8 Stored High
586 Disable Port 1 Timeout Timer ONLY for 60 min.
587 Disable Port 2 Timeout Timer ONLY for 60 min.
588 Disable Port 3 Timeout Timer ONLY for 60 min.
589 Enable Port 1 Timeout Timer ONLY for 60 min.
590 Enable Port 2 Timeout Timer ONLY for 60 min.
591 Enable Port 3 Timeout Timer ONLY for 60 min.
592 Current wind speed & direction
593 Current Outdoor temperature
594 Indoor humidity
595 Outdoor humidity
596 Wind Speed high & direction (since Midnight)
597 Outdoor Temp High (since Midnight)
598 Outdoor Temp Low (since Midnight)
599 Reserved for future use
600 Reserved for future use
601 Reserved for future use
602 Reserved for future use
603 Reserved for future use
604 Reserved for future use
605 Speak Current Remote Base Freq & Offset
606 Start General Timer 4
607 Start General Timer 5
608 Start General Timer 6
609 Stop General Timer 4
610 Stop General Timer 5
611 Stop General Timer 6
612 Disable Port 1 Inactivity Timer
613 Disable Port 2 Inactivity Timer
614 Disable Port 3 Inactivity Timer
615 Port 1 Inactivity Timer to Programmed Value
616 Port 2 Inactivity Timer to Programmed Value
617 Port 3 Inactivity Timer to Programmed Value
618 Pause Macro Execution for 1 seconds
619 Pause Macro Execution for 2 seconds
620 Pause Macro Execution for 4 seconds
612 – 659 Reserved for future use
660 – 679 Suspend Setpoint 1 – 20
680 – 699 Resume Setpoint 1-20
701 – 791 Call Macro 1 – 90 (there is no Function 765)
To Next Page
Loading...
Need help?
General
