Owners Manual - Arctic Spas®
Electrical Specications
Electrical Installation Instructions
DANGER!
Shock Hazard.
DO NOT PROCEED if
you are not a licensed
electrician
. This
diagram is for
reference only!
ARCTIC SPAS
®
MUST BE WIRED IN ACCORDANCE WITH ALL
APPLICABLE LOCAL ELECTRICAL CODES. ALL ELECTRICAL WORK SHOULD BE
DONE BY AN EXPERIENCED, LICENSED ELECTRICIAN
AND APPROVED BY A LOCAL BUILDING/ELECTRICAL
INSPECTION AUTHORITY.
The electrical supply must satisfy the requirements of the spa as marked on the certication label which is
located adjacent to the spa controller (pack). If the ratings are not legible or cannot be found, please contact
the factory for assistance. - DO NOT GUESS!
WARNING: Removing or bypassing any GFCI /RCD breaker will result in an unsafe
spa and will void the spa’s warranty.
IMPORTANT: Your Arctic Spa has been carefully engineered to provide maximum
safety against electric shock. Remember, connecting the spa to an
improperly wired circuit will negate many of its safety features.
1212