Arctic Spas Custom Series User Manual

Owners Manual - Arctic Spas®
CAUTION!
Do Not turn on
power to the spa
until the spa is lled
to the required
level. Running the
spa pump without
water could cause
immediate damage
and void your
warranty!
CAUTION!
If your spa or AWP is equipped with Spa Boy or
ONZEN please consult the: Spa Boy Owners
Manual or ONZEN User Guide for further setup
requirements.
9) Test and Adjust Sanitizer level (Helth Canada mandates 3 - 5 ppm for residential Hot Tubs Spas).
10) Rotate diverters to centre position and press “Pump 2” button on topside control panel for 5
seconds to activate the “Boost ltration system”. When this system is enabled, “boo”
is displayed on the screen. This will give 45 min of circulation and ltration to disperse the
chemicals.
1414

Arctic Spas Custom Series Specifications

General

Brand	Arctic Spas
Model	Custom Series
Category	Hot Tub
Language	English