- 15 -
Settings for running cycle
Push on and buttons at the same time in more than 6 sec. and the menu item [ C ] appears in the display.
With
and buttons it’s possible to look through the main menu item [ C ], [ F ] and [ d ]. Push on button to
enter the submenu from the main menu items.
With
and buttons it’s possible to look through the submenus menu items. Push on button to enter the
desired menu item and adjust the setting with
and buttons.
To confirm the new setting, push
button. Leave the submenu and main menu item with the button.
Parameter Description Setting range Default setting
=1 siseretsyH 1C +1/ 0, 2= +1/-1, 3= +2/-1, 4= +2/-2, 5= +3/-2, 6= +3/-3 4
C5 Activation of condenser sensors 0 = FAV / 1 = One sensor (C) / 2 = Two sensors (C & D) 1
nim 5 .nim 51 ot 0 rood nepo yb pots rosserpmoC 6C
.yad hcae 4 8 ro 7,6,5,4,3,2,1 h42/selcyc gnitsorfed fo rebmuN 1d
d3 Defrosting by start-up sequence 0 = Start-up defrosting / 1 = no defrosting 0
.nim 03 .nim 06 ot 01 emit gnitsorfeD 4d
d5 Defrosting method 1 = auto / 2 = air / 3 = electrical 2 (K)
.nim 01ot 0 emit gnippirD 6d 0 min.
Values presented in light grey are values which can be different from model to model.
To Next Page
Loading...