Argox CP-2240 - Loading Ribbon; Preparing Ribbon

2 Get started Loading Ribbon
19
2.4 Loading Ribbon
The following steps only apply to thermal transfer printing mode only.
Direct thermal does not need ribbon to be installed.
2.4.1 Preparing Ribbon
Find the two Ribbon Core Adaptors in printer package and fix them into new ribbon
rolls from the left to the right.
Note:
- Media and ribbon types should be matched to provide with
optimal print results.
- Always use ribbon that is wider than the media to protect the
print head from wear.
- For direct thermal printing, do not load ribbon in the printer.