3 Printer operation Reset your printer
26
3.2 Reset your printer
By resetting your printer, you can return your printer to the state it was in
when you receive it. This can help you solve some problems caused by
settings changed during the printing.
Do the following to reset your printer:
1. Turn on the printer and wait till both LED 1 and LED 2 stay solid green.
2. Press the "FEED" button for 4 seconds, LED 1 and LED 2 will go off in
order. (at this step, if the “FEED” button is pressed for 8 seconds, printer
will reset first >> feed blank labels as media calibration >> and then print
configuration/ self-test labels.)
3. Once LED 2 becomes lit again, release the FEED button.
4. LED 1 will become lit, too. At this moment, the printer has resumed its
factory default settings.
Printer will delete those print tasks received but not yet printed.
Note:
The printer factory default settings are stored in printer’s flash;
these settings remain stored, without being erased even the printer
power is disconnected.
To Next Page
Loading...
