Argox CP-2240 - 6 Specifications; Printer

6 Specifications Printer
52
6 Specifications
This chapter provides specifications for the printer.
6.1 Printer
Model
CP-2240
Print method
Direct Thermal & Thermal Transfer
Resolution
203 dpi (8 dots/mm)
Operation Mode
Standard: Continuous mode, Tear-off mode
Optional: Cutter mode, Peeler mode
Sensor
Media Reflective sensor x 1 (movable) &
Media Transmissive sensor x 1 (Center fixed) /
Head open switch / Ribbon end sensor
Operation interface
LED indicator x 2, Button x 1
Print Speed
Up to 7ips
Print Length
Max 100”(2540 mm)
Print Width
Max 4.1” (104 mm)
Communication Interface
USB, RS-232, Parallel
Programming Language
CP-2240: PPLA, PPLB
CP-2240Z: PPLA, PPLB, PPLZ
Accessories
Cutter: Full Cutter, Partial Cutter
Peeler
Onboard Memory
16 MB SDRAM, 8 MB Flash ROM
CPU Type
32 bit RISC microprocessor
Panel
2 LED, 1 Button
LED
1
st
LED: Green
2
nd
LED: Green
Software---Label editing
Windows Driver (Windows XP/Vista/ Win 7/ Win 8/
Win 10), BarTender® from Seagull Scientific
Software--- Utility
Printer Utility、Font Utility
Optional Items
Media Stacker, Full Cutter, Partial Cutter, Peeler, RTC Card