Argox D4 250 - Page 13

1 Introduction Printer lights
7
Blinking
pattern
LED 2
LED 1
Description
Green
Green
The printer is ready to print.
Green
Green
In pause.
Green
Green
The printer is transmitting data.
Green
Green
TPH high temperature.
Green
Green
The printer is writing data to the flash or USB memory.
The USB memory is being initialized.
Amber
Amber
Paper jam.
The media is out when the print data sent to the printer.
Paper end.
Red
Red
H/W Error
The printhead is broken.
Communication error (RS-232C).
Cutter error (with optional cutter).
The RTC battery is low. (If the printer has a
built-in RTC)
Red
Red
Command
Error
An EEPROM for backup cannot be read or
written properly.
A command has been fetched from an odd
address.
Word data has been accessed from a place
other than the boundary of the word data.
Long word data has been accessed from a
place other than the boundary of the long
word data.
Command error.