Argox D4 250 - Specifications; Printer

6 Specifications Printer
47
6 Specifications
This chapter provides specifications for the printer. Specifications are subject
to change without notice.
6.1 Printer
Model
D4-250
D4-350
Print method
Direct Thermal
Resolution
203 dpi (8 dots/mm)
300 dpi (12 dots/mm)
Media Alignment
Centered
Operation Mode
Standard: Continuous mode, Tear-off mode
Optional: Cutter mode, Peeler mode
Sensor
Media Sensor: Gap Sensor (Transmissive, Fixed)
Sensor (Reflective, Movable)
Head Open Switch
Print Speed
2, 3, 4, 5, 6 inches/sec
(50.8, 76.2, 101.6, 127, 152.4
mm/sec)
2 &3 ips for peel off mode
2, 3, 4 inches/sec
(50.8, 76.2, 101.6
mm/sec)
2 &3 ips for peel off
mode
Print Darkness
Darkness level – PPLB: SD 0 ~ 30
Default – PPLB: SD 8
Max Printable Area
Max. 100”
Max. 50”
Print Ratio
Average print ratio within 15 % or less (whole print layout
area)
Full width with 1 mm pitch is required
Interface
USB (Type A and Type B), Ethernet
Optional Interface
RS-232C, Centronics (SPP Mode), Wireless LAN, Bluetooth
Programming
Language
PPLA+PPLB+PPLZ
Accessories
Peeler, Full Cutter, Partial Cutter, RTC, External Media Stand
On-Board Memory
Standard Memory (Flash ROM): 16 MB
User Memory: 8 MB