Argus E25 MOD II User Manual

Argus E25 MOD II - Operating Instructions
17
DANGER
When
working on equipment and
components
carrying electric
voltage,
or on pipework, very
serious
injuries or death can be
caused
by electric shock, burns,
high
pressure in the system, or
poisoning.

Make sure there are no hot or
hazardous media in the pipe-
lines.

Make sure that all electric
power supplies to the unit and
connecting leads are voltage-
free.

Make sure the plant is
switched off and secured
against unauthorised switch-
ing back on.

Make sure the unit and pipe-
lines have cooled so that they
are no more than hand warm.

Make sure that all electrical
connecting leads have ade-
quate insulation.

Wear suitable protective cloth-
ing and, when necessary, use
suitable protective equipment.
For more information about suitable pro-
tective clothing and protective equipment,
see the safety data sheet for the medium
being handled.
Make sure that all electric connections
are voltage-free.
Empty the pipelines (when installing
the unit with ball valves / ball valve
combinations).
Make sure that pipelines are clean
and free of residual media (when in-
stalling the unit with ball valves / ball
valve combinations).
Switch the plant off and secure it
against unauthorised switching back
on.

Argus E25 MOD II Specifications

General

Brand	Argus
Model	E25 MOD II
Category	Controller
Language	English