Argus E25 MOD II User Manual

Argus E25 MOD II - Operating Instructions
21
Connecting the unit
DANGER
An
incorrectly connected unit can
cause
an accident that results in
very
serious injuries or death.

Make sure the unit is only
connected to the power sup-
ply/pipeline by suitable spe-
cialist personnel.

Make sure that the direction of
flow in the pipeline agrees
with
the flow direction arrow on the
unit (for deliveries that include
a valve).
The specialist personnel must have
knowledge and experience in electrical
installation and in making pipe connec-
tions with the types
4 of joint employed on the valve.
ATTENTION!
Damage
to the unit if the power
supply
or flange connections are
too
weak (for deliveries that in-
clude
a valve).

Make sure that the electrical
power supply is sufficiently
stable to provide the power
the unit requires and to toler-
ate the voltage and current
deviations to be expected in
operation.
For
a valve supplied with the unit:

Make sure the connections
are strong enough to with-
stand the weight of the unit
and the forces to be expected
in operation.
Make sure that the plant is switched
off and electric cables are voltage-
free.
For a valve supplied with the unit:
Make sure the pipeline system in the
plant is clean.
Make sure there are no foreign mate-
rials in the valve.
Install the valve so that the direction of
flow corresponds to the marking on
the operatingshaft.
CAUTION
Danger
of burns from hot
surfaces
or
thermal radiation

Wear protective clothing suit-
able for the temperatures that
occur in the plant.

Argus E25 MOD II Specifications

General

Brand	Argus
Model	E25 MOD II
Category	Controller
Language	English