EasyManua.ls Logo

Argus E25 MOD II - Post-Operation and Maintenance; Hazardous Substance Handling After Operation; External Cleaning Procedures; Routine Unit Maintenance

Argus E25 MOD II
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Argus E25 MOD II - Operating Instructions
30
After operation
DANGER
For
units installed in
contaminated
areas,
there is a danger of severe
or
lethal injury from hazardous
substances
on the unit.
Work on contaminated units
shall only be carried out by
specialist personnel.
Wear the specified protective
clothing during all work in the
contaminated area.
Make sure the unit has been
fully decontaminated before
working on it.
During such work follow the
instructions for handling the
hazardous media concerned.
Cleaning to remove external
dirt
CAUTION
Danger
of burns from hot
surfaces
or
thermal radiation
Wear protective clothing suit-
able for the temperatures that
occur in the plant.
Remove external dirt from the unit with
clean water and a lint-free cloth.
To remove stubborn dirt, use a clean-
ing agent suitable for the deposits and
a lint-free cloth.
Maintenance of the unit
CAUTION
Danger
of burns from hot
surfaces
or
thermal radiation.
Wear protective clothing suit-
able for the temperatures that
occur in the plant.
The unit requires little maintenance.