EasyManuals Logo
Home>Argus>Controller>E25 MOD II

Argus E25 MOD II User Manual

Argus E25 MOD II
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Argus E25 MOD II - Operating Instructions
3
Introduction
These Operating Instructions provide the operating personnel
with information and instructions relevant for the safe installa-
tion, commissioning and operation of the ARGUS-E25 MOD II
electric valve actuator.
In the text below, rotary actuators will be abbreviated to “units”.
The Operating Instructions are intended for all persons who
install, commission, operate, maintain, clean or dispose of this
unit. The Operating Instructions are intended in particular for
customer-service fitters, trained specialist personnel and quali-
fied and authorised operating personnel.
Each of these persons must have familiarised himself with and
understood these operating instructions.
Following the instructions contained in these Operating Instruc-
tions helps recognise and avoid potential hazards, and to in-
crease the reliability and useful life of the units. Apart from the
instructions in these operating instructions, it is essential that
the legal regulations, standards and rules relating to accident-
prevention that apply in the country and at the place where the
unit is used are observed, together with all relevant technical
regulations and rules for safe and appropriate work practices.
Availability of the instructions
Always keep these Operating Instructions with the plant docu-
mentation. Make sure that these Operating Instructions are
available to the operator.
The Operating Instructions are considered to be a part of the
unit. If you sell the unit or pass it on in some other way, these
Operating Instructions must be handed over to the new owner.
Types of valve actuator illustrated and de-
scribed
The units described in these Operating Instructions are variants
of type
E25 MOD II
The standard units are described in these operating instruc-
tions. Please contact the manufacturer for information about
additional components not described here.
It is possible that some additional equipment for the unit is not
described and illustrated in detail in these Operating Instruc-
tions. You will find information about such equipment in the
documentation supplied with the actuator.
If you have any queries, please contact the manufacturer.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Argus E25 MOD II and is the answer not in the manual?

Argus E25 MOD II Specifications

General IconGeneral
BrandArgus
ModelE25 MOD II
CategoryController
LanguageEnglish