Argus E25 MOD II User Manual

Argus E25 MOD II - Operating Instructions
40
Technical data
You will find all relevant technical data for
the ARGUS E25 MOD II on the unit’s
typeplate, and in the Technical Data
Sheet.
Working clearance
To be able to remove the unit from an
installed valve, you need at least 750 mm
working clearance above the unit.
Application limits
Details of the application limits are given
on the unit’s typeplate.
CE Conformity / certification
On the following pages you will find a
copy of the EU Declaration of Conformity
for the ARGUS E25 MOD II.
If the declaration has since been updated
or modified, it will be supplied with the
unit.
Th
e appendix also includes the EU Type
Approval Examination Certificate.
Certificate No. IECEx EPS 15.0046x,
is
sued by Bureau Veritas, certifies the
classification and conformity of E25
MOD II with the IECEx explosion
protection requirements.
Marking: "Ex d IIB + H2 T3 Gb".
Since 1988 the quality assurance system
for our works manufac
turing ball valves
and actuators in Ettlingen, Germany, has
been certified as meeting the require-
ments of the international standard ISO
9001.

Argus E25 MOD II Specifications

General

Brand	Argus
Model	E25 MOD II
Category	Controller
Language	English