11.1.1. NETWORK SETUP
• Hostname: The name of the device in the network.
• Title of this site: Textual description of the device, for example CameraFrontRight, that will
appear as the title of the browser tab.
• DHCP: Check this checkbox to have the camera to operate in DHCP mode, that is to obtain its.
o IP address
o Netmask
o Gateway
o Primary and Secondary DNS
from a DHCP server (DHCP mode).
11.1.2. IP VERSION 4 AND 6
The camera supports IPv4 and IPv6. Both versions can be enabled simultaneously. At most two IPs
can be assigned to a device.
• IPv4: The IP address for the camera can be set
o Automatically via DHCP (see option above), or
o Manually, a static IP address.
• IPv6:
o Only static IP addresses are supported.
o The /16 option stands for the length of the subnet mask (16 refers to a 8 characters long
mask)
To Next Page
Loading...
