11.1.1. HTTPS
The camera’s onboard webserver is capable of running in HTTPS mode, which ensures an
encrypted, secure channel between you and the camera.
For more information on HTTPS, please check the HTTPS Guide in the HELP menu of the web
interface.
11.1.2. ADVANCED CAMERA INTERFACE PROTOCOLS
Enable ONVIF: Checking this checkbox will enable the ONVIF interface of the camera. Please note
that with ONVIF enabled the amount of memory available for image buffering will be smaller.
Enable RTP: Select this option to enable RTP streaming.
Enable NTCIP: Enables the National Transportation Communications for Intelligent Transportation
System (ITS) Protocol (NTCIP) which creates a seamless integration into standardized ITS systems.
For more information on NTCIP, please check the NTCIP Guide in the HELP menu of the web
interface.
11.1.3. MODEM
You can enable the modem by clicking Enabled. Enter the Access Point Name of your network
operator in APN. If required, credentials can be entered in Username and Password. Set the predial
number in Phone. Use a SIM card with unlocked PIN. Only available on devices equipped with a
GPS/4G modem.
To Next Page
Loading...
