24
Menu Item Function
X-ray Counter
The device will display two counters. One is the Overall History
Counter, which displays the total lifetime X-ray shots for the
device. The other, Trip Counter, can at any time be reset
to zero by the operator.
When Reset is selected and the Select
button is pressed, the
user will be prompted with the message Reset Trip Counter?
When Yes is selected and the Select
button is pressed, the Trip
Counter is reset to zero and the device is returned to the counter
display.
When No is selected and the Select
button is pressed, the
device is returned to the counter display with no change.
When Back is selected and tthe Select
button is pressed, the
device returns to the Main Menu.
NOTE: Reset Defaults also resets the Trip Counter to zero.
Reset Defaults
[Technique Factors and Trip
Counter]
Allows the operator to restore the factory default settings with
which the device was shipped. These defaults are:
• X-rays will be unlocked;
• Audible sound will be set at full volume;
• Trip counter will be reset to zero;
• All factory timer settings/technique factor combinations will
be reset to factory defaults, overriding any custom settings the
operator may have input.
The operator can use the Increase
and Decrease buttons
to toggle between Yes and No in response to the menu prompt
Reset Exposure Time To Factory Settings?
If Yes is selected, the system will confirm the selection by
displaying All Cusom Settings Will Be Erased. Are You Sure?
Selecting Yes and then the Select
button reverts any customized
exposure settings to the factory defaults and returns the device to
the Main Menu.
If ever No is selected and then the Select
button pressed, the
customized settings will not be changed and the system returns to
the Main Menu.
Exit
Allows the user to leave the Main Menu and return to normal
operation. (Powering off and then on also exits the menu.)
To Next Page
Loading...
