6
1.0 Getting Started
1.1 Intended Use/Indications for Use
The NOMAD Pro 2 X-ray System is designed to be used for both adult and pediatric
patients by trained dentists and dental professionals for producing diagnostic dental X-ray
images.
Caution: U.S. Federal law restricts this device to sale by or on the order of a
physician or other licensed practitioner.
1.2 Unpack, Check, and Register NOMAD Pro 2 System
nUnwrap individual components from the protective plastic and check for any
noticeable signs of damage. The package system includes the following items:
• NOMAD Pro 2 Device
• 2 Handsets (08500087 for standard, 08500088 for black)
• Charging Cradle and the AC/DC Power Supply (08500102 for standard, 08500103 for
black; other cord sets available upon request)
• Certificate of Conformance, Getting Started Guide, Product Registration Card, and
NOMAD Pro 2 Operator Training CD
oPreliminary Checks:
Item Check
Device Labels Verify that the serialized device label is in place (located on lower side of
unit).
Other Labels Verify that the serial number on the product registration card matches
the device serial number on the device and the device serial number on
the carrying case. Verify that the handsets’ label (located on the top of
each handset) and the charging cradle label (located on the bottom of the
charging cradle) are all in place.
Collimator Cone and
Backscatter Shield
These two items provide operator protection and should be inspected for
shipping damage.
Trigger Switch Should freely move in and out when depressed and released.
Device Housing Should be free of cracks or fractures.
pComplete the product registration card and mail it with proper postage to Aribex
today, or go on-line at aribex.com/portable-x-ray-machine/warranty-registration.
Registering your device will activate your NOMAD Care Plan (the first year is free).
For terms and conditions of the NOMAD Care Plan, visit nomadcareplan.com/
termsandconditions.
To Next Page
Loading...
