Why ARIBEX Nomad Pro 2 indicator lights illuminate orange on charging cradle?
If the indicator lights illuminate orange when first placing the handset of your ARIBEX Dental equipment on the charging cradle, the male connectors on the charging cradle may be damaged. In this case, the NOMAD Pro 2 will require authorized service.
How to improve contrast in ARIBEX Nomad Pro 2 X-ray images?
An X-ray image might lack sufficient contrast due to underexposure (too light) or overexposure (too dark). If underexposure is the cause, increase the exposure time. If it's overexposure, decrease the exposure time and check the film expiration date, as old film can produce dark, grainy images. Also, if you are using film-based imaging, ensure your chemical developer is fresh and at the proper temperature.
What to do if the 'Incomplete Exposure' alarm appears on my ARIBEX Dental equipment?
The 'Incomplete Exposure' alarm on your ARIBEX Dental equipment appears when the trigger is released before the timed exposure completes. To resolve this, ensure you depress the trigger for the full duration of the timed exposure. The alarm will automatically clear within 15 seconds or by pressing any button on the user interface panel.
What does the 'System Failure' alarm mean on my ARIBEX Nomad Pro 2?
The 'System Failure' alarm on your ARIBEX Dental equipment indicates that self-diagnostics detected a potential issue during X-ray firing. You can clear this warning alarm by powering the device off and then on again. If the alarm reappears, the NOMAD Pro 2 will require authorized service.
What to do if the 'Handset Failure' alarm appears on my ARIBEX Dental equipment?
The 'Handset Failure' alarm on your ARIBEX Dental equipment indicates that the handset is not communicating with the device. First, ensure the handset is securely attached. If the issue persists, the protective fuse in the handset may be blown, or the batteries may be impaired. Replace the handset with a newly charged one. Check the charging cradle: if the charging bars illuminate solid red or not at all, the handset will require authorized service.
What does 'incomplete' mean on ARIBEX Dental equipment?
If the 'INCOMPLETE' message is displayed on the screen of your ARIBEX Dental equipment, be sure to depress the trigger for the duration of the timed exposure. This condition automatically clears within 15 seconds or by pressing any button on the user interface panel.
How to troubleshoot ARIBEX Nomad Pro 2 Dental equipment control panel with no power?
If there is no power to the ARIBEX Dental equipment control panel, ensure the handset is securely attached. If the display does not illuminate after pressing 'Power' several times, the handset is likely the problem. You can also replace it with a newly charged handset. Use the charging cradle to determine if the first handset battery can be recharged.
Why does ARIBEX Nomad Pro 2 Dental equipment ready indicator terminate early?
If the READY indicator on your ARIBEX Dental equipment terminates before an exposure starts, double-check the exposure time setting and re-enable when operator and patient are again properly situated. The NOMAD Pro 2 READY condition expires if the X-ray exposure is not initiated within 15 seconds of the start of the READY condition.
How to fix insufficient contrast in ARIBEX Nomad Pro 2 Dental equipment X-ray?
If the image from your ARIBEX Dental equipment X-ray exposure lacks sufficient contrast due to underexposure (image is too light), increase the exposure time setting. You can also refer to the instructions for 'Incomplete Exposure'.
What to do if there is no power to my ARIBEX Dental equipment NOMAD Pro 2 control panel?
If there is no power to the NOMAD Pro 2 control panel of your ARIBEX Dental equipment, and pressing the power button several times doesn't illuminate the display, the attached handset is likely the problem. Ensure the handset is securely attached. If all handsets appear fully charged, the NOMAD Pro 2 will require authorized service.
Guidelines for safe operation, operator protection, and minimizing radiation exposure.
Presents data on radiation leakage and scatter, comparing NOMAD Pro 2 exposure levels to limits.
Describes the function and adjustment of the backscatter shield for operator protection.
How to select and set appropriate exposure times based on patient and imaging parameters.
Detailed process for starting and finishing an X-ray exposure using the trigger.
Guidance on positioning the device and patient for optimal intra-oral X-ray imaging.
Features contributing to image quality and tips for achieving optimal results.
Provides pre-set technique factors and guidance for adjusting them based on patient needs.
A guide to diagnosing and resolving common operational problems and error messages.
General| Type | Handheld X-ray System |
|---|---|
| Tube Voltage | 60 kV |
| Tube Current | 2.5 mA |
| Focal Spot | 0.4 mm |
| Total Filtration | 1.5 mm Al equivalent |
| Display | LCD |
| Usage | Intraoral Radiography |
| X-ray Generator | High Frequency |
| X-ray Source | X-ray tube |
| Weight | 2.5 kg (5.5 lbs) |
| Battery Type | Lithium Polymer |
| Image Sensor | Not applicable (external sensor required) |
| Battery Life | Up to 400 exposures per charge |
To Next Page
