Aries 2070450 - Step 4: Final Tightening; Step 5: Cargo Basket Installation; Step 6: Completion and Inspection

PAGE 3 • 2070450-INS-RC • 877.287.8634 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM
Step 4
After all brackets are snug, proceed
to fully tighten with an M8 allen wrench.
Step 5
To install a cargo basket, follow the
basket manufacturer's instructions.
Once complete, adjust the brackets
if needed to make sure cross tubing
aligns with the basket. Tighten down
the brackets with the cam handle.
WARNING: Do not over tighten the
cam handle or it could cause cracking
or breaking of the roof gutter. Periodically
check to make sure the brackets are
fully secured.
Step 6
Congratulations on the installation
of your new ARIES roof cargo brackets.
With the roof cargo brackets installed,
periodic inspections should be
performed to ensure all mounting
hardware remains tight.