Aries AdvantEDGE User Manual

ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8 634
•
2055975-INS-RA
•
PAGE 1
INSTALLATION MANUAL
2055975
Level of Difficulty
Easy
This is the second of two manuals
required to complete this installation.
The first manual is included with
your mounting brackets.
Parts List
1 Driver / left
AdvantEDGE
™
side bar
1 Passenger / right
AdvantEDGE
™
side bar
Attachment hardware is supplied with the
mounting brackets. Hardware quantities will
vary depending on the vehicle application.
Torque Specifications
Metric
M6 bolt 3 ft-lbs.
M8 bolt 7 ft-lbs.
M10 bolt 16 ft-lbs.
M12 bolt 28 ft-lbs.
SAE
1/4" bolt 3 ft-lbs.
5/16" bolt 7 ft-lbs.
3/8" bolt 16 ft-lbs.
7/16" bolt 20 ft-lbs.
1/2" bolt 28 ft-lbs.
Use above torque setting unless otherwise noted
Tools Required
Ratchet set Torque wrench
This is the second of two manuals
required to complete this installation.
The first manual is included with
your mounting brackets.
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To protect the product, wax after installing. Regular waxing is recommended
to add a protective layer over the finish. Do not use any type of polish or wax
that may contain abrasives that could damage the finish.
For polished, gloss and other smooth finishes,
polish may be used to clear small scratches and scuffs on the finish.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Product Photo
Front
Rear
Product Registration
CURT Group stands behind our products with industry leading warranties.
You can help us continue to improve our product line and help us understand
your needs by registering your purchase by visiting:
warranty.curtgroup.com/surveys
At CURT Group, customer is king. We value your feedback and we use that information to make
improvements on our products. Please, take a minute and let us know how we are doing.

Aries AdvantEDGE Specifications

General

Brand	Aries
Model	AdvantEDGE
Category	Automobile Accessories
Language	English

Summary

Product Information and Preparation

Parts List

Lists all components included with the side bars for installation.

Tools Required

Details the necessary tools for performing the installation.

Torque Specifications

Provides recommended torque values for various fasteners during installation.

Notes and Maintenance

Offers essential notes before installation and advice for product care.

Product Registration

Information on how to register your purchase for warranty and feedback.

Installation Procedure

Step 1: Initial Side Bar Placement

Carefully position the side bar and insert bolts into mounting brackets.

Step 2: Securing Side Bar

Lift and align the side bar, then snug hardware without full tightening.

Step 3: Final Adjustments and Tightening

Adjust side bar position and tighten all brackets and connections.

Step 4: Passenger Side Installation

Repeat all installation steps for the passenger side of the vehicle.