Arista AP-3500-E01 - Installing Expansion Card

21
Installing expansion card
The MINI-PCIE slot supports PCIE cards such as a Wi-Fi LAN card, mSATA SSD, SCSI
card,USBcard,andothercardsthatcomplywithPCIEspecications.
Step 1.
Before installing the expansion card, please make sure that the power supply is
switchedo󰀨andthepowercordisunplugged.
Please read the documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2.
Remove the system unit cover (if the motherboard is already installed in a chassis).
Step 3.
Remove the bracket facing the slot that you intend to use. Keep the screws for later
use.
Step 4.
Alignthecardconnectorwiththeslotandpressrmlyuntilthecardiscompletely
seated on the slot.
Step 5.
Fasten the card to the chassis with screws.