51
ITGB
The auto button can be used to enable or
disable temperature adjustment.
The temperature adjustment of a building
consists of maintaining the indoor temper-
ature at a constant level while the climatic
conditions change.
To achieve this result, the Clima Manager
modulates the temperature of the hot water
ow to the radiators in accordance with the
indoor temperature detected by the room
sensor and the outdoor temperature detect-
ed by the outdoor sensor (if tted).
Press the auto button:
- Disabled
- Enabled “
”
turn the knob to enable or disable tempera-
ture adjustment; press the con rmation but-
ton.
The info button can be used to display in-
formation relating to the status of the boiler.
Press the info button and turn the knob to
select one of the following options:
- zone number
- heating water pressure
- outdoor temperature
- hot water output ow
- set heating temperature
- set hot water temperature
- months remaining until next service
- assistance service name
- assistance service telephone number
- comfort function status
- AUTO function status
- solar indirect cylinder water temperature
Press the detail button to display the value.
Press the exit button to return to the previ-
ous screen.
Man/Timer Menu
0 2 4 6 10 12 14 16 18 20 22 24h8
019
20 0
19 0
16 30Mo 26 09 2006
Temperature adjustment
enabled display
rapid selection buttons
To Next Page
Loading...
