Ariston CLIMA MANAGER - Boiler Parameters Configuration; General Boiler Settings; Heating Parameters Part 1

56
ITGB
boiler parameters
Press the Menu button.
Turn the knob and select menu 2 “Boiler
Parameters”; press the con rmation but-
ton. Press the con rmation button again to
select parameter 21 “Access code”. Turn the
knob to enter the access code and press the
con rmation button.
Turn the knob and select parameter:
- 22 General Settings
press the con rmation button and turn the
knob to select one of the following options:
220 Slow ignition level
221 Zones Anti-freeze Temp. (room)
222 Fan modulation exclusion
223 Under- oor heating or RT2
224 Mechanical timer  tted
225 Delayed heating start time
226 Flue gas/air pipe length
227 Temperature adjustment device
228 Boiler version
Press the con rmation button and turn the
knob to change the value or setting, then
press the con rmation button.
Press the exit button to return to the previ-
ous screen.
- 23 Heating - part 1
press the con rmation button and turn the
knob to select one of the following options:
230 Max. absolute heating power level
231 Max. adjustable heating power level
232 Max. domestic hot water rpm percent-
age
233 Min. rpm percentage
234 Max. heating rpm percentage
235 Heating delay type
236 Set delayed ignition
237 Heating post-circulation
238 Circulation pump operation
239 Circulation pump modulation T delta
Press the con rmation button and turn the
knob to change the value or setting, then
press the con rmation button.
Back Enter
220
222
General
221
225
Soft ignition
Fan modulati
Zone frost T
CH Start Del
44
1
5.0
0
0228 Boiler versi
Select
Boiler version