52
ITGB
Menu
The Clima Manager is powered by the boiler.
When the boiler is switched on, the display
is also enabled and shows the software ver-
sion code, then the normal display screen
appears.
Press the menu button to access the list
of menus. Use the central knob to scroll
through the menu list. Press the con rma-
tion button to enter the selected menu.
Warning:
Some parameters are protected with an ac-
cess code (safety code) which protects the
boiler operation settings from unauthorised
use. The access code can be found in the
technical instruction booklet supplied with
the boiler.
0 Date - Time - Language
00 Language
01 Date + Time
02 Set Summer Time
1 Schedule programming
10 Party
11 Reduced
12 Holiday
13 Set schedule zone 1
14 Set schedule zone 2
15 Set schedule zone 3
16 Set hot water schedule
2 Boiler Parameters
20 Access code
3 Solar heating system & Indirect cylin-
der
30 General Settings
31 Access code
4 Zone 1 Parameters
40 Set Temperature
41 Access code
5 Zone 2 Parameters
50 Set Temperature
51 Access code
6 Zone 3 Parameters
60 Set Temperature
61 Access code
7 Tests & Utilities
700 Set Temperature
701 Deaerator Cycle
8 Assistance Parameters
81 Access code
Clima Manager
General Settings
Set contrast
Backlight
Reset
Access code