58
ITGB
solar heating system & indirect cylinder
Press the Menu button.
Turn the knob and select menu 3 “Solar
heating system & Indirect cylinder”; press
the con rmation button.
Turn the knob and select:
30 General settings, press the con rmation
button and turn the knob to select param-
eter 300 Set storage tank temperature;
press the con rmation button and turn the
knob to change the value, then press the
con rmation button.
Press the exit button to return to the previ-
ous screen.
Turn the knob and select:
31 “Access code”; press the con rm button.
Turn the knob to enter the access code and
press the con rmation button.
Caution: these parameters are only enabled
with the solar control P.C.B.
Turn the knob and select:
320 Anti-Legionnaire’s disease
321 Solar con guration
322 Enable Electrical Valve\Mixer
323 Collector T delta for Pump start-up
324 Collector T delta for Pump Stop
325 Collector min. T for Pump Start
326 Ram at collector
327 Recooling function
328 Delta at setpoint Gas storage
329 Collector Anti-freeze T
Press the con rmation button and turn the
knob to change the value or setting, then
press the con rmation button.
Press the exit button to return to the previ-
ous screen.
Back Validate
Param Code: 300
Storage Setpoint T
40