82
ITGB
installation
Positioning
The appliance detects the room tempera-
ture, therefore several factors should be
taken into account when choosing an instal-
lation site. Keep it away from sources of heat
(radiators, sunlight, replaces, etc.) and from
draughts, doorways and windows which
could a ect the temperature readings.
It should be installed approximately 1.50
metres above the oor level.
Caution!
Installation should be performed by a quali-
ed technician.
Before tting the appliance, make sure the
electricity supply is not connected.
Installation
The Clima Manager must be tted to the
wall before the BUS line is connected.
• Separate the xing base by inserting a
screwdriver into the two cracks on the
lower part.
• Fix the Clima Manager base to the wall at
the chosen point, using the screws sup-
plied in the kit.
To Next Page
Loading...
