Ariston CLIMA MANAGER - Clima Manager (Wireless) Settings; Wireless General Settings

68
ITGB
Clima Manager wireless
Press the Menu button. Turn the knob and
select the “Remote control” menu; press
the con rmation button. Turn the knob and
select:
- General settings
Press the con rmation button, turn the knob
and select the parameter values to be di-
splayed:
Software version
Hardware version
Zone number
(note: the device must be addressed to
the zone in which it is installed). Press the
exit button to return to the previous screen.
- Set contrast
Press the con rmation button and turn the
knob to change the display contrast value,
then press the con rmation button. Press
the exit button to return to the previous
screen.
- Reset
Press the con rmation button and turn the
knob to enable or disable the Clima Manager
reset procedure, then press the con rmation
button. The reset procedure results in all the
timer settingbeing restored.
- Battery saving
Press the con rmation button and turn the
knob to select one of the following options:
No (display permanently on)
Partly
( display enters standby
mode at night)
Maximum (display standby).
Press the con rmation button and turn the
knob to change the setting, then press the
con rmation button again. Press the exit
button to return to the previous screen.
Back Enter
General
Reset
RemoCon
Set contrast lcd
Service Code
Battery Saving
Set contrast lcd
selection