Ariston CLIMA MANAGER - Wireless Installer and Communication

69
ITGB
Clima Manager wireless
Turn the knob and select “Access code”, then
press the con rmation button. Turn the
knob to enter the access code and press the
con rmation button.
- Installer parameter
Press the con rmation button, turn the knob
and select:
Zone no. (zone address)
Room T shift.
Press the con rmation button and turn the
knob to change the values (where permit-
ted), then press the con rmation button
again. Press the exit button to return to the
previous screen.
- Radio communication
Press the con rmation button and turn the
knob to select:
Instruction.
to verify the communication  eld. Press the
con rmation button and turn the knob to
visualize the value.
Press the exit button to return to the pre-
vious screen.
Disconnect
to disconnect the Clima Manager to the
wireless net. Press the entry button.
Press the con rmation button to disconnect
the Clima Manager.
Back Detail
Strength Rx
Indications
Level Tx
Strength Tx
Level Rx
Instructions
menu selection