84
ITGB
installation (wireless)
CAUTION!
Installation should be performed by a quali-
ed technician.
Installation criteria
The wireless Clima Manager should be in-
stalled:
- away from electromagnetic elds (e.g. tele-
visions, computers, TV aerials, refrigerators,
microwaves)
- in an area where there is no equipment
with a frequency of 2.4 GHz in the area as
this may cause interference
- away from metal structures or elements
with internal metal parts (e.g. special win-
dows or reinforced cement)
- don’t use the Climate Manager as portable
device
- so that the vertical distance between the
Clima Manager and the receiver is not
greater than one shelf height.
If these simple guidelines are not observed
the product may not operate correctly.
Positioning
The appliance detects the room temperatu-
re, therefore several factors should be taken
into account when choosing an installation
site. Keep it away from sources of heat (radia-
tors, sunlight, replaces, etc.) and from drau-
ghts, doorways and windows which could
a ect the temperature readings. It should be
installed approximately 1.50 metres above
the oor level.
Installation
The remote control bracket should be xed
to the wall as follows:
• Remove the xing bracket located on the
rear part of the remote control
• Fix the remote control bracket in place.
To Next Page
Loading...
