38
6.5.3 Removing the automatic air vent
1.
Unscrew valve top “Y” (FIG. 6.35);
2. Remove valve complete with float (FIG 6.36).
FIG. 6.35
Y
FIG. 6.36
6.5.2 Removing the safety valve
1.
Disconnect the discharge pipe work from below the
boiler;
2. Unscrew and remove the valve “X” (FIG. 6.34).
FIG. 6.34
X
Important! Before any component is removed, the boiler
must be drained of all water.
6.5.1 Removing the pump pressure switch
1.Remove the pump pressure switch electrical connections
“W” (FIG 6.33);
2.Unscrew the pump pressure switch by
using
a spanner on
the nut;
3.Remove the pump pressure switch.
6.5 ACCESS TO THE WATER CIRCUIT
FIG. 6.33
W